How work with CAN-Hacker and GMLAN
We’ve found an old Oplel instrument cluster in our car service and tryied to connect with it.
We used CAN-Hacker Baby but you can use CAN-Hacker-3.0. For connect to the GMLAN you need:
- Connect a CAN-Low line from CAN-Hacker to the GND
- Connect a CAN-High line from CAN-Hacker to the GMLAN
- Set 10kbit/s in the Settings->CAN-Baudrate. CAN-Hacker will understand 10 like 33.333 kbit/s
For cluster ON, you should send this message:
ID=0x170 DLC=3 DATA = 0x55 0x55 0x55