LIN bus adapter for CAN-Hacker 3.2
The LIN bus adapter allows you to complete the CAN-Hacker 3.2 interface functionality with the LIN bus analyzer. The adapter is installed on the standard interface connectors.
LIN analyzer requires activation with key. The key is provided to the user by the interface serial number. Activation is performed in the UBT program.
The analysis of the LIN bus performance is carried out in the CARBUS Analyzer software.
The software allows receiving and transmitting framesover the LIN bus, supporting the emulation of Slave and Master nodes.
The connection to the LIN you can use an attached cable.
Red— +12 V
Black — GND
3 — LIN
4 — +12V forLIN
7 — GND
8 — GND